Aliosque subditos et thema
FTP in DOS. mTCP mTCP is a suite containing several utilities, one of which is FTP. It is similar to the FTP client of various Windows, running in Command Prompt. In order to install and use mTCP: 1. mTCP [ Home page ] 2. Packet driver for Ethernet network card: http://www.crynwr.com/drivers/ http://www.georgpotthast.de/sioux/packet.htm 3. Create a folder, for example C:\DRIVERS\. Put there: a packet driver for Ethernet network card. 4. Set up network. For example, by means of Microsoft Network Client 3.0 [ How-to page ] 5. Start packet driver. In the case discussed it is: C:\DRIVERS\PCIPKT.COM 0x60 6. Unpack the archive with mTCP into a folder, C:\SOFT\MTCP for instance, and create a tcp.cfg file in it with the strings: PACKETINT 0x60 HOSTNAME FTP_IN_DOS The value of PACKETINT - the interrupt number used in the packet driver starting. The value of HOSTNAME - any. 7. Start DHCP.EXE (DHCP will set up mTCP for work with the network): DHCP 8. Start FTP: FTP [ FTP address / host ] There will be a prompt for a name, after that - the password. Next, it is better to switch to passive mode: XFERMODE PASSIVE [ The list of the main commands supported by FTP of mTCP is available in ftp.txt, included in mTCP suite archive ] To exit: QUIT mTCP - GNU GPL v3.