Kompx.com or Compmiscellanea.com

Renaming folders in DOS

Operating systems : MS-DOS 6.0+ [ 1 ]

Renaming a folder in DOS by MOVE command:


- Renames FOLDER1 into FOLDER2

The method works in Windows command prompt as well.

[ 1 ]

MS-DOS 6.0+ tested - but it also may happen to work well under other versions of MS-DOS or other DOS'es.

Aliosque subditos et thema


Bold numbers in ordered lists


Numbers in an ordered list made bold without having any extra HTML tags added: List item List item List item HTML / XHTML. Code: <ol> <li>List item</li> <li>List item</li> <li>List item</li> </ol> CSS. Code: ol {counter-reset: item;} ol li {display: block;} ol li:before {content: counter(item) ". "; counter-increment: item; font-weight: bold;} There is no obvious way at the moment to style only numbers marking ordered list items. A workaround is to use a CSS counter instead of the default automatic numbering of ordered lists. The way a CSS counter is started allows to style specifically the marking numbers. Like in the example, where numbers in an ordered list are styled bold. This method also lets to use other characters after the numbers - besides dots. Like a parenthesis / round bracket instead of a dot. Or handling of space between the number, punctuation mark and the content proper of list item. [ 1 ] As well as Netscape 9.0+. [ 2 ] As well as Netscape 9.0+.

Network setup in DOS. Microsoft Network Client 3.0


In order to install Microsoft Network Client 3.0 and set up network in DOS, there have to be several programs at hand: 1. Microsoft Network Client 3.0 [ Download ] 2. NDIS 2.0 driver for Ethernet network card. For example: Realtek RTL8029AS [ Download ]. Drivers for other network cards may be found, for instance, on web sites of Ethernet cards manufacturers. 3. If it is not MS-DOS 6.0+ to be used, QEMM97 [ Download ] Installing Microsoft Network Client 3.0 and setting up network in DOS, step by step: 1. Create a folder, for example C:\DRIVERS\. Put there: a NDIS 2.0 driver for Ethernet network card. 2. Prepare installation floppies of Microsoft Network Client 3.0: DSK3-1.EXE -d A: DSK3-2.EXE -d A: 3. Start setup.exe from the first floppy and begin Microsoft Network Client 3.0 installation. Installation is starting. Press Enter to continue Select folder for Microsoft Network Client 3.0 to be installed to. It may be any or the suggestion of the installer may be left as it is - in the case discussed it is left as it is. Enter Microsoft Network Client 3.0 installer examining the system files Select driver for Ethernet network card. If there is no right driver on the list, choose "*Network adapter not shown on list below ..." Enter This dialogue appears if there was no right driver on the proposed list of Ethernet network card drivers and "*Network adapter not shown on list below ..." has been selected. Specify the path to the folder containing the appropriate driver for the Ethernet network card. In the case discussed it is C:\DRIVERS\, typing it in. Enter Select driver from C:\DRIVERS\ folder specified in the previous step. In the case discussed it is RTL8029AS PCI Ethernet Adapter. Enter Choose to let or not to let Microsoft Network Client 3.0 use more RAM in its work to get the best performance. Any of the two choices is acceptable. For example - let it to. Enter Enter user name of up to 20 characters. It can contain Latin letters, numbers and characters listed. In the case discussed it is "net".